English
Español
Our Products
Featured Product Lineup
Explore our comprehensive range of high-quality refrigeration equipment designed for industrial and commercial applications.
2500 W Cooling @ 35°C
IP55 Dust / water jets
90 kg Unit weight
R454C Low-GWP refrigerant
This industrial-grade air conditioner is designed for large electrical enclosures in manufacturing facilities, processing plants, and heavy industrial environments. The unit delivers 2500W of cooling capacity at 35°C ambient, with a heavy-duty scroll compressor and dual-circuit condenser for enhanced heat rejection in high-temperature conditions.
The IP55-rated steel enclosure provides protection against dust ingress and low-pressure water jets, making it suitable for factory floor installations where washdown and airborne particulates are present. The unit includes an integrated controller with Modbus RTU communication, alarm outputs, and a user-friendly LCD interface for local configuration.
Quick Reference
Power supply400V AC / 3-phase
Rated current6.2 A per phase
RefrigerantR454C / 2×480g
Sound level62 dB(A) @ 1m
Dimensions1200×750×380 mm
Core Advantages
Heavy-Duty Scroll Compressor Industrial-grade scroll compressor with 10-year design life. Operates continuously at 55°C ambient with minimal capacity derating. Includes vibration isolators and suction accumulator.
Dual-Circuit Condenser Two independent condenser circuits with separate fans. Provides 50% redundancy and allows operation in partial-load mode. Condenser coils coated for corrosion resistance.
Steel Enclosure Construction Heavy-gauge galvanized steel with powder coating (120µm). Reinforced corners and structural ribs for vibration resistance. All hardware is stainless steel grade A2.
Factory Automation Ready Modbus RTU and optional PROFINET integration. Dry-contact alarm outputs for remote fault indication. Supports PLC and SCADA system connectivity.
Product Features
01 Industrial Compressor
Scroll type with internal thermal protection. Capable of continuous operation at high ambient temperatures. Includes crankcase heater for low-temperature startups.
02 Microchannel Condenser
Aluminum microchannel design with corrosion-resistant coating. Dual axial fans with EC motors. Automatic fan speed control based on head pressure.
03 Advanced Controller
Microprocessor-based with 4.3-inch LCD screen. Supports setpoint 5-50°C, differential 1-5°C. Alarm logging with last 50 events. Modbus RTU standard.
04 IP55 Enclosure
Heavy-gauge steel with powder coating. Sealed cable glands and gasketed access doors. Drainage ports with check valves. Suitable for factory floor installations.
05 Protection Suite
Over-voltage, under-voltage, phase loss, phase reversal, compressor overcurrent, high-pressure (4.0 MPa), and low-pressure (0.2 MPa) protection. All thresholds user-configurable.
06 Maintenance Access
Front access to all service points including compressor, filter drier, expansion valve, and electrical panel. Removable panels with captive fasteners.
Technical Specifications
Electrical & Cooling
Cooling capacity (35°C)2500 W ± 4%
Operating range-40°C ~ +55°C
Power supply400V AC, 3-phase, 50Hz
Rated current6.2 A (per phase)
Refrigerant / chargeR454C / 2 × 480 g
Mechanical & Environmental
Enclosure ratingIP55 / NEMA 12
Sound pressure (1m)62 dB(A) @ 25°C
Evaporator airflow850 m³/h
Condenser airflow1350 m³/h
Dimensions (H×W×D)1200 × 750 × 380 mm
Weight90 kg
Application Scenarios
Manufacturing Plants - Enclosures housing PLCs, HMIs, and automation controllers on factory floors with dust, vibration, and temperature variations.
Processing Facilities - Food and beverage, pharmaceutical, and chemical plants requiring washdown-capable equipment with corrosion resistance.
Material Handling - Conveyor control cabinets, sortation systems, and warehouse automation equipment requiring reliable thermal management.
Power Generation - Turbine control cabinets, generator control panels, and auxiliary power system enclosures in power plants.
Frequently Asked Questions
The 2500W cooling capacity is suitable for cabinets up to 3.5 cubic meters with typical industrial heat loads. Sizing depends on internal heat dissipation, ambient temperature, and cabinet insulation. Technical support can provide specific sizing calculations.
IP55 provides protection against dust ingress and low-pressure water jets. NEMA 12 is a US standard for industrial enclosures offering protection against dust, dirt, oil, and coolant drips. This unit meets both standards for global application.
Inspect air filters monthly in dusty environments. Clean condenser coil quarterly. Perform annual refrigeration circuit inspection including refrigerant charge verification and leak detection. Compressor oil should be analyzed every 3 years or 20,000 operating hours.
Yes. The unit includes Modbus RTU over RS-485 as standard. Optional PROFINET and BACnet MSTP are available. All operational data, alarms, and setpoints are accessible through the communication interface.
The unit operates continuously up to 55°C ambient. Above 45°C, the capacity is derated by approximately 6% per 5°C. The controller automatically adjusts compressor speed and fan operation to maintain cooling performance within safe limits.
The unit is designed for wall mounting using the integrated flanges with M12 bolts. Optional floor stand and ceiling mount kits are available. The unit can also be pole-mounted using an optional bracket kit for outdoor industrial sites.
Clearance: 350 mm inlet / 550 mm outlet Wiring: 4 mm² copper per phase Fuse: 16A per phase (C-curve) Ambient: -40°C to +55°C Storage: -40°C to +70°C
Product Categories
Complete Refrigeration Portfolio
Comprehensive range of industrial refrigeration equipment — standard & custom
Air Cooled Chiller
Efficient air-cooled systems for plastics, laser, food & diverse industries
energy savingWater Cooled Chiller
High-performance water-cooled industrial chillers with superior COP
high efficiencyAir Cooled Box Chiller
Compact, ready-to-use air cooled box chillers for small to medium loads
plug & playWater Cooled Box Chiller
Space-saving water cooled box type chillers with integrated pump & tank
integratedAir Cooled Screw Chiller
Heavy-duty screw compressor, air cooled — for large industrial applications
heavy dutyWater Cooled Screw Chiller
High-capacity water cooled screw chillers for continuous operation
reliableWater Cooled Screw Evaporative Cooling Chiller
Evaporative assisted cooling for maximum efficiency in hot climates
ecoProfessional Customization
Tailor-made solutions — from design to manufacturing, for your specific needs
CUSTOM ISO 9001 · CE Certified
Shanghai Soouney Refrigeration Equipment Co., Ltd.
A large-to-medium-sized high-tech enterprise integrating R&D, production and sales. Upholding "integrity, quality, service and innovation" — delivering reliable cooling solutions to the world.
11+
Export Countries
200+
Projects Delivered
19+
Years of Innovation
100%
Client Satisfaction
2007
Engineering Excellence in Refrigeration
Shanghai Soouney was founded with a vision to become a leading force in the refrigeration industry. We are China industrial cabinet air conditioner Manufacturers and Custom industrial cabinet air conditioner Suppliers. Today, we are a renowned brand in cabinet air conditioners and industrial chillers, recognised by professionals worldwide.
Rooted in the Chinese market, we provide reliable refrigeration solutions to clients across the globe — from standard products to professional customisation.
From standard products to professional customization — we deliver precision cooling.
R&D Driven
High starting points, stringent standards — continuous innovation
Integrity & Trust
Long-term partnerships built on transparency and after-sales support
Certified Quality
ISO 9001, CE, and industry-specific approvals across all lines
Global Mindset
Serving 40+ countries with tailored refrigeration solutions
"We don't just cool equipment — we build trust, one project at a time."
Why Soouney
Driven by Quality & Innovation
Committed to delivering excellence through continuous improvement and customer-centric solutions.
R&D Focus
High starting points, stringent standards — continuous product improvement
Integrity & Service
Long-term partnerships built on trust, transparency and after-sales support
Global Presence
Rooted in China, serving worldwide with reliable refrigeration solutions
Certified Quality
ISO 9001, CE, and industry-specific approvals for all product lines
