English
Español
Our Products
Featured Product Lineup
Explore our comprehensive range of high-quality refrigeration equipment designed for industrial and commercial applications.
Electrical Cabinet Air Conditioner
Compact thermal management for control panels · IP54 · 1000W-1800W range
This air conditioner is designed for electrical cabinets housing sensitive control components, PLCs, and power distribution gear. The unit delivers 1500W of cooling at 35°C ambient, with a sealed rotary compressor and corrosion-resistant condenser coil. The slim profile allows installation on cabinets with limited mounting depth, while the IP54-rated enclosure provides protection against dust and water splashes. The integrated controller maintains cabinet temperature within ±1.5°C of setpoint, with Modbus RTU communication for remote supervision.
The system includes a condensate evaporation tray that eliminates the need for external drainage in most installations. The controller features adaptive fan speed control that reduces noise and energy consumption during partial load conditions.
1500 W Cooling capacity
IP54 Enclosure rating
±1.5°C Temp. stability
230V AC / 50Hz 5.8 A rated R134a refrigerant 520 × 380 × 200 mm 28 kg
Core Advantages
Compact FootprintSlim profile design with 200mm depth allows installation in shallow electrical cabinets without modifying existing panel layouts.
Condensate EvaporationIntegrated evaporation tray uses condenser heat to evaporate collected moisture, eliminating external drainage in most installations.
Adaptive Fan ControlVariable speed fans adjust airflow based on thermal load, reducing energy consumption and noise during off-peak operation.
Modbus IntegrationStandard RS-485 interface with Modbus RTU protocol enables seamless integration with building management and SCADA systems.
Product Features
Rotary Compressor Hermetically sealed with internal overload protection. Mounted on rubber isolators to minimize vibration transmission to the cabinet. Capillary tube expansion with filter drier.
Microchannel Condenser Aluminum microchannel coil with hydrophilic coating for enhanced water runoff. Dual-speed condenser fan with automatic head pressure control for consistent performance.
Digital Controller Microprocessor-based with LCD display. Supports setpoint 10-50°C, differential 1-5°C. Alarm outputs for high temperature, sensor failure, and compressor fault.
IP54 Enclosure Galvanized steel casing with polyester powder coating. Sealed cable glands and gasketed access panels. Suitable for indoor and sheltered outdoor installations.
Technical Specifications
Electrical & Cooling
Cooling capacity (35°C)1500 W ± 5%
Operating range-10°C ~ +50°C
Power supply230V AC, 50Hz
Rated current5.8 A
Refrigerant / chargeR134a / 680 g
Mechanical & Environmental
Enclosure ratingIP54 (IEC 60529)
Sound pressure (1m)54 dB(A) @ 25°C
Airflow (evaporator)520 m³/h
Dimensions (H×W×D)520 × 380 × 200 mm
Weight28 kg
Application Scenarios
PLC Control Cabinets - Industrial automation panels requiring stable temperatures for programmable logic controllers and I/O modules.
VFD Enclosures - Variable frequency drive cabinets where heat dissipation from power electronics requires active cooling.
Power Distribution - Switchgear and distribution panels in industrial, commercial, and utility installations.
IT & Network - Edge computing nodes and network cabinets in non-climate-controlled spaces requiring reliable thermal management.
Frequently Asked Questions
The 1500W cooling capacity is suitable for cabinets up to 2.5 cubic meters (2500 liters) with typical internal heat loads. Actual performance depends on cabinet insulation, solar gain, and internal heat dissipation. Contact technical support for specific sizing calculations.
The unit includes an integrated evaporation tray positioned over the condenser coil. Condensate drips into the tray and is evaporated by heat from the condenser discharge. In high humidity conditions, an optional drain kit is available for gravity drainage.
The standard communication interface is Modbus RTU over RS-485. Optional BACnet MSTP is available as a factory-installed option. All operational parameters, alarm status, and temperature readings are accessible through the communication port.
Inspect and clean air filters every 3 months. Check condenser coil for dust accumulation quarterly. Verify condensate drain operation annually. The refrigeration circuit requires professional inspection every 2 years including refrigerant charge verification and leak detection.
The unit is designed for standard electrical cabinet mounting with M8 bolts. The cabinet must have a flat surface and sufficient structural strength to support the 28kg unit weight. Recommended wall thickness is 2.0mm minimum. A mounting template is provided with each unit.
Product Categories
Complete Refrigeration Portfolio
Comprehensive range of industrial refrigeration equipment — standard & custom
Air Cooled Chiller
Efficient air-cooled systems for plastics, laser, food & diverse industries
energy savingWater Cooled Chiller
High-performance water-cooled industrial chillers with superior COP
high efficiencyAir Cooled Box Chiller
Compact, ready-to-use air cooled box chillers for small to medium loads
plug & playWater Cooled Box Chiller
Space-saving water cooled box type chillers with integrated pump & tank
integratedAir Cooled Screw Chiller
Heavy-duty screw compressor, air cooled — for large industrial applications
heavy dutyWater Cooled Screw Chiller
High-capacity water cooled screw chillers for continuous operation
reliableWater Cooled Screw Evaporative Cooling Chiller
Evaporative assisted cooling for maximum efficiency in hot climates
ecoProfessional Customization
Tailor-made solutions — from design to manufacturing, for your specific needs
CUSTOM ISO 9001 · CE Certified
Shanghai Soouney Refrigeration Equipment Co., Ltd.
A large-to-medium-sized high-tech enterprise integrating R&D, production and sales. Upholding "integrity, quality, service and innovation" — delivering reliable cooling solutions to the world.
11+
Export Countries
200+
Projects Delivered
19+
Years of Innovation
100%
Client Satisfaction
2007
Engineering Excellence in Refrigeration
Shanghai Soouney was founded with a vision to become a leading force in the refrigeration industry. We are China electrical cabinet air conditioner Manufacturers and Custom electrical cabinet air conditioner Suppliers. Today, we are a renowned brand in cabinet air conditioners and industrial chillers, recognised by professionals worldwide.
Rooted in the Chinese market, we provide reliable refrigeration solutions to clients across the globe — from standard products to professional customisation.
From standard products to professional customization — we deliver precision cooling.
R&D Driven
High starting points, stringent standards — continuous innovation
Integrity & Trust
Long-term partnerships built on transparency and after-sales support
Certified Quality
ISO 9001, CE, and industry-specific approvals across all lines
Global Mindset
Serving 40+ countries with tailored refrigeration solutions
"We don't just cool equipment — we build trust, one project at a time."
Why Soouney
Driven by Quality & Innovation
Committed to delivering excellence through continuous improvement and customer-centric solutions.
R&D Focus
High starting points, stringent standards — continuous product improvement
Integrity & Service
Long-term partnerships built on trust, transparency and after-sales support
Global Presence
Rooted in China, serving worldwide with reliable refrigeration solutions
Certified Quality
ISO 9001, CE, and industry-specific approvals for all product lines
