English
Español
Our Products
Featured Product Lineup
Explore our comprehensive range of high-quality refrigeration equipment designed for industrial and commercial applications.
Outdoor Cabinet Air Conditioner IP55 Rated
Ingress protection rating IP55 per IEC 60529 · Dust and water jet resistant · All-weather operation
2000 W Cooling capacity
IP55 Enclosure rating
-40°C Low ambient startup
This IP55-rated air conditioner is designed for outdoor cabinets where protection against dust ingress and water jets is required. The unit delivers 2000W of cooling at 35°C ambient, with a sealed rotary compressor and corrosion-resistant condenser coil. The IP55 enclosure ensures protection against damaging dust deposits and low-pressure water jets from any direction, making it suitable for roadside, industrial, and coastal installations.
The system includes a crankcase heater and low-ambient control logic for reliable startup down to -40°C. The controller provides Modbus RTU communication for remote monitoring and alarm notification. All electrical connections are sealed with IP55-rated cable glands, and the cabinet features a sloping top to prevent water accumulation.
Quick Reference
Power supply230V AC / 50Hz
Rated current6.8 A
RefrigerantR134a / 950g
Sound level57 dB(A) @ 1m
Dimensions780 × 580 × 280 mm
Weight40 kg
IP55 Protection Features
Dust Ingress Protection
IP55 rating ensures protection against harmful dust deposits. All intake and exhaust vents are fitted with fine mesh filters that prevent airborne particles from entering the cabinet. Filters are removable for cleaning without tools.
Water Jet Resistance
Protected against low-pressure water jets from any direction. All seams are gasketed and sealed with silicone. Drainage channels direct water away from critical components. Tested at 30 kPa water pressure.
Corrosion-Resistant Construction
Galvanized steel casing with powder coating (minimum 80µm thickness). Stainless steel fasteners (A2 grade) and aluminum condenser coil with epoxy coating. Salt spray tested per ISO 9227.
Sealed Electrical Enclosure
All electrical connections are housed in IP55-rated compartments. Cable glands maintain ingress protection at entry points. The controller board is conformally coated for moisture resistance.
Technical Specifications
| Parameter | Specification |
|---|---|
| Cooling capacity (35°C ambient) | 2000 W ± 4% |
| Operating temperature range | -40 °C ~ +55 °C |
| Power supply | 230 V AC, 50 Hz, single phase |
| Rated current | 6.8 A (max 9.5 A locked rotor) |
| Refrigerant / charge | R134a / 950 g |
| Enclosure rating | IP55 (IEC 60529) |
| Sound pressure level (1m) | 57 dB(A) @ 25°C |
| Evaporator airflow | 680 m³/h |
| Condenser airflow | 1050 m³/h |
| Dimensions (H × W × D) | 780 × 580 × 280 mm |
| Weight | 40 kg |
| Communication | Modbus RTU (RS-485) |
Application Scenarios
01
Roadside Telecom Cabinets - IP55 protection ensures reliable operation in roadside environments exposed to dust, rain, and road spray from passing vehicles.
02
Industrial Control Enclosures - Factory floor and warehouse installations where dust from manufacturing processes and washdown water jets are present.
03
Coastal Monitoring Stations - Salt spray resistance and ingress protection for equipment installed near marine environments with high humidity and corrosive conditions.
04
Agricultural Automation - Dusty and wet conditions in agricultural processing facilities where equipment requires protection against washdown procedures.
Frequently Asked Questions
Q: What does IP55 rating mean for this product?
IP55 provides protection against dust ingress sufficient to prevent harmful deposits, and protection against low-pressure water jets from any direction. This makes the unit suitable for outdoor applications where rain, road spray, and dust are present.
Q: Can this unit operate in freezing temperatures?
Yes. The unit includes a crankcase heater that energizes below 5°C and low-ambient control logic. The controller monitors evaporator pressure and adjusts operation to prevent coil freeze-up down to -40°C.
Q: How often should the air filters be cleaned?
In typical outdoor conditions, inspect filters every 3 months. In dusty environments, increase frequency to monthly. Filters are washable with mild detergent and water. Replace if damaged or after 12 months of use.
Q: What is the recommended mounting clearance?
Maintain 300mm clearance on the condenser air inlet side and 500mm on the outlet side. The unit should be mounted vertically with the drain ports at the lowest point to ensure proper water drainage.
Q: Does the unit require special electrical protection?
A 10A circuit breaker is recommended. The unit includes internal over-voltage, under-voltage, and compressor overcurrent protection. External surge suppression is recommended for installations in lightning-prone areas.
Q: Can the unit be connected to a building management system?
Yes. The Modbus RTU interface allows integration with BMS and SCADA systems. All operational parameters and alarms are accessible via the communication port using standard Modbus function codes.
Product Categories
Complete Refrigeration Portfolio
Comprehensive range of industrial refrigeration equipment — standard & custom
Air Cooled Chiller
Efficient air-cooled systems for plastics, laser, food & diverse industries
energy savingWater Cooled Chiller
High-performance water-cooled industrial chillers with superior COP
high efficiencyAir Cooled Box Chiller
Compact, ready-to-use air cooled box chillers for small to medium loads
plug & playWater Cooled Box Chiller
Space-saving water cooled box type chillers with integrated pump & tank
integratedAir Cooled Screw Chiller
Heavy-duty screw compressor, air cooled — for large industrial applications
heavy dutyWater Cooled Screw Chiller
High-capacity water cooled screw chillers for continuous operation
reliableWater Cooled Screw Evaporative Cooling Chiller
Evaporative assisted cooling for maximum efficiency in hot climates
ecoProfessional Customization
Tailor-made solutions — from design to manufacturing, for your specific needs
CUSTOM ISO 9001 · CE Certified
Shanghai Soouney Refrigeration Equipment Co., Ltd.
A large-to-medium-sized high-tech enterprise integrating R&D, production and sales. Upholding "integrity, quality, service and innovation" — delivering reliable cooling solutions to the world.
11+
Export Countries
200+
Projects Delivered
19+
Years of Innovation
100%
Client Satisfaction
2007
Engineering Excellence in Refrigeration
Shanghai Soouney was founded with a vision to become a leading force in the refrigeration industry. We are China Outdoor Cabinet Air Conditioner IP55 Rated Manufacturers and Custom Outdoor Cabinet Air Conditioner IP55 Rated Suppliers. Today, we are a renowned brand in cabinet air conditioners and industrial chillers, recognised by professionals worldwide.
Rooted in the Chinese market, we provide reliable refrigeration solutions to clients across the globe — from standard products to professional customisation.
From standard products to professional customization — we deliver precision cooling.
R&D Driven
High starting points, stringent standards — continuous innovation
Integrity & Trust
Long-term partnerships built on transparency and after-sales support
Certified Quality
ISO 9001, CE, and industry-specific approvals across all lines
Global Mindset
Serving 40+ countries with tailored refrigeration solutions
"We don't just cool equipment — we build trust, one project at a time."
Why Soouney
Driven by Quality & Innovation
Committed to delivering excellence through continuous improvement and customer-centric solutions.
R&D Focus
High starting points, stringent standards — continuous product improvement
Integrity & Service
Long-term partnerships built on trust, transparency and after-sales support
Global Presence
Rooted in China, serving worldwide with reliable refrigeration solutions
Certified Quality
ISO 9001, CE, and industry-specific approvals for all product lines
