English
Español
Our Products
Featured Product Lineup
Explore our comprehensive range of high-quality refrigeration equipment designed for industrial and commercial applications.
Compact Electrical Cabinet Air Conditioner
Reduced-footprint cooling for space-constrained electrical enclosures · IP54 · 800W-1500W
Specification snapshot
Cooling capacity1200 W at 35°C
Enclosure ratingIP54 / NEMA 12
Power supply230V AC, 50/60Hz
RefrigerantR134a, 540 g
Dimensions440 × 330 × 160 mm
Net weight21 kg
CommunicationModbus RTU
Lead time4-6 weeks
Compliance
CE marked under LVD 2014/35/EU and EMC 2014/30/EU. Refrigerant data sheet per EN 378. RoHS 2 compliant. Declaration of conformity supplied with each unit.
This compact air conditioner is specified for electrical cabinets where the available panel area or internal volume limits the size of thermal equipment. The unit delivers 1200W of cooling at 35°C ambient from a 160mm casing depth and 440mm height, allowing installation on smaller side panels, narrow cabinet sections, and retrofit enclosures that were not originally provisioned for active cooling.
The single-circuit refrigeration system uses a rotary compressor and microchannel condenser. Because the internal footprint is reduced, the unit is suited to cabinets with dense component layouts where a larger evaporator section would obstruct wiring or terminal access.
1200 W Cooling at 35°C ambient
4.4 A Rated current
160 mm Casing depth
21 kg Net weight
Commercial Advantages
Reduced mounting envelope 160mm depth and 440mm height allow installation on panel areas that cannot accommodate standard units. Suitable for narrow cabinet sections and retrofit projects with fixed internal layouts.
Front service access Filter, controller, and electrical terminations accessible from the front face. Refrigeration service ports reachable after removing one cover. No dismounting required for routine maintenance.
Plant network integration Modbus RTU standard with documented register map. Dry-contact alarm relay for connection to existing annunciator panels or PLC inputs. Setpoint and alarm thresholds adjustable remotely.
Project documentation Dimensional drawings, capacity tables, wiring diagrams, and refrigerant data sheets supplied for submittal packages. Test records available for documented projects.
Service parts availability Compressors, fans, controllers, and pressure switches held as service parts for a minimum of 10 years from manufacture. Consumables available from stock.
Warranty terms 24 months from commissioning or 30 months from shipment. Compressor coverage extends to 60 months, conditional on documented maintenance per the published schedule.
Technical Parameters
Cooling and electrical
Cooling capacity at 35°C1200 W ± 5%
Capacity at 45°C ambient1080 W (derated)
Operating ambient range-10°C to +50°C
Power supply230V AC, 50/60Hz
Rated current4.4 A
Locked rotor current11.8 A
Refrigerant and chargeR134a, 540 g
Mechanical and protection
Enclosure ratingIP54 / NEMA 12
Casing materialGalvanized steel, 100 µm powder coat
FastenersStainless steel A2
Sound pressure at 1 m46 dB(A) at 25°C
Dimensions (H×W×D)440 × 330 × 160 mm
Net weight21 kg
Protection functionsOver/under voltage, compressor overcurrent, high pressure
Deployment Contexts
01 Compact control panels Small automation panels with dense terminal and relay layouts where larger evaporator sections would obstruct wiring access.
02 Retrofit cooling projects Existing cabinets where internal components cannot be rearranged and panel area is limited to the reduced mounting envelope.
03 Instrument and junction cabinets Field instrument enclosures and junction boxes requiring modest cooling capacity with minimal external protrusion.
04 Skid and package equipment Modular skids and package units where overall transport dimensions are fixed and thermal equipment must fit within the existing envelope.
Selection and Installation Notes
Sizing Calculate total internal dissipation and add solar gain for outdoor-facing panels. Apply a 20% margin. For cabinets above 1.5 m³, provide component list for thermal calculation.
Panel preparation Cutout dimensions 390 × 280 mm. Minimum panel thickness 1.5mm steel. Reinforce panels below 1.5mm. Sealing gasket maintains IP54 rating when compressed during mounting.
Clearance Maintain 130mm at the evaporator return and 240mm at the condenser discharge. Do not obstruct the front service access panel.
Power and protection Dedicated 2-pole breaker, 10 A C-curve. Copper conductors 2.5 mm². Grounding resistance ≤ 4 Ω. External surge protection recommended for exposed installations.
Condensate Evaporated by condenser heat in standard configuration. Where continuous ambient humidity exceeds 85% RH, route the optional drain kit to a collection point.
Maintenance interval Filter inspection every 2 to 3 months. Condenser coil cleaning quarterly. Annual verification of refrigerant charge, pressure switch operation, and electrical torque values.
Procurement FAQ
The compact model reduces casing dimensions to 440 × 330 × 160 mm and cooling capacity to 1200W, compared with 1500W and larger dimensions for the standard unit. The refrigeration circuit uses a single compressor rather than dual circuits. It is intended where mounting area is the limiting factor rather than capacity requirement.
The unit requires a 390 × 280 mm cutout. Existing cutouts larger than this can be adapted using a transition plate. Cutouts smaller than the required dimension cannot be enlarged without panel modification. Provide the existing cutout dimensions for evaluation.
The compact casing platform is available with 400V three-phase input at the same dimensional envelope, with cooling capacity up to 1500W. Contact the sales team for the three-phase model reference and documentation.
Dimensional drawing, wiring diagram, capacity table, refrigerant data sheet, Modbus register map, mounting template, and declaration of conformity. Test records for refrigerant charge and pressure verification are available on request.
Standard configuration lead time is 4 to 6 weeks. Orders above 50 units are scheduled individually. Custom voltages, communication options, or casing finishes add 2 to 3 weeks. Contact the sales team for a production slot quotation.
Standard warranty is 24 months from commissioning or 30 months from shipment. Compressor coverage extends to 60 months. Service parts including compressors, fans, controllers, and pressure switches are held for a minimum of 10 years from manufacture.
Product Categories
Complete Refrigeration Portfolio
Comprehensive range of industrial refrigeration equipment — standard & custom
Air Cooled Chiller
Efficient air-cooled systems for plastics, laser, food & diverse industries
energy savingWater Cooled Chiller
High-performance water-cooled industrial chillers with superior COP
high efficiencyAir Cooled Box Chiller
Compact, ready-to-use air cooled box chillers for small to medium loads
plug & playWater Cooled Box Chiller
Space-saving water cooled box type chillers with integrated pump & tank
integratedAir Cooled Screw Chiller
Heavy-duty screw compressor, air cooled — for large industrial applications
heavy dutyWater Cooled Screw Chiller
High-capacity water cooled screw chillers for continuous operation
reliableWater Cooled Screw Evaporative Cooling Chiller
Evaporative assisted cooling for maximum efficiency in hot climates
ecoProfessional Customization
Tailor-made solutions — from design to manufacturing, for your specific needs
CUSTOM ISO 9001 · CE Certified
Shanghai Soouney Refrigeration Equipment Co., Ltd.
A large-to-medium-sized high-tech enterprise integrating R&D, production and sales. Upholding "integrity, quality, service and innovation" — delivering reliable cooling solutions to the world.
11+
Export Countries
200+
Projects Delivered
19+
Years of Innovation
100%
Client Satisfaction
2007
Engineering Excellence in Refrigeration
Shanghai Soouney was founded with a vision to become a leading force in the refrigeration industry. We are China Compact Electrical Cabinet Air Conditioner Manufacturers and Custom Compact Electrical Cabinet Air Conditioner Suppliers. Today, we are a renowned brand in cabinet air conditioners and industrial chillers, recognised by professionals worldwide.
Rooted in the Chinese market, we provide reliable refrigeration solutions to clients across the globe — from standard products to professional customisation.
From standard products to professional customization — we deliver precision cooling.
R&D Driven
High starting points, stringent standards — continuous innovation
Integrity & Trust
Long-term partnerships built on transparency and after-sales support
Certified Quality
ISO 9001, CE, and industry-specific approvals across all lines
Global Mindset
Serving 40+ countries with tailored refrigeration solutions
"We don't just cool equipment — we build trust, one project at a time."
Why Soouney
Driven by Quality & Innovation
Committed to delivering excellence through continuous improvement and customer-centric solutions.
R&D Focus
High starting points, stringent standards — continuous product improvement
Integrity & Service
Long-term partnerships built on trust, transparency and after-sales support
Global Presence
Rooted in China, serving worldwide with reliable refrigeration solutions
Certified Quality
ISO 9001, CE, and industry-specific approvals for all product lines
