English
Español
Our Products
Featured Product Lineup
Explore our comprehensive range of high-quality refrigeration equipment designed for industrial and commercial applications.
Slim Electrical Cabinet Air Conditioner
Reduced-depth side-mount cooling for space-restricted enclosure installations · IP54 · 1200W-2000W
This slim-profile air conditioner is specified for electrical cabinets where wall clearance, cable tray routing, or aisle width limits the depth available for thermal equipment. The unit delivers 1600W of cooling at 35°C ambient from a 145mm casing depth, using a rotary compressor and microchannel condenser. The reduced footprint allows installation on side panels adjacent to walkways, pipe racks, or adjacent cabinets without violating clearance requirements.
Procurement summary
Cooling capacity1600 W at 35°C
Enclosure ratingIP54 / NEMA 12
Power supply230V AC, 50/60Hz
RefrigerantR134a, 620 g
Casing depth145 mm
Lead time4-6 weeks
145 mm Casing depth
1600 W Cooling at 35°C
5.4 A Rated current
26 kg Net weight
-10°C / +50°C Ambient range
Commercial Advantages
Reduced installation depth
145mm casing depth permits installation where standard units at 200mm or more would obstruct aisles, cable trays, or adjacent equipment. Suitable for retrofit into cabinets originally designed without active cooling.
Retrofit compatibility
Mounting pattern and cutout dimensions are documented for common cabinet panel configurations. Template supplied for on-site cutout preparation. No cabinet re-engineering required in most cases.
Documented performance data
Capacity curves, pressure ratings, and electrical data provided in the technical submittal. Test records for refrigerant charge and pressure verification available for project documentation.
Service access from front
Filter, controller, and electrical terminations accessible from the front face. Refrigeration service ports reachable after removing one access panel. Maintenance does not require dismounting the unit.
Plant network integration
Modbus RTU standard with register map for status, alarms, and setpoint adjustment. Dry-contact alarm relay for connection to existing annunciator panels or PLC inputs.
Compliance documentation
CE marked under LVD 2014/35/EU and EMC 2014/30/EU. Declaration of conformity, wiring diagram, and refrigerant data sheet supplied with each unit. RoHS 2 compliant.
Technical Parameters
Cooling and electrical
| Cooling capacity at 35°C | 1600 W ± 5% |
| Capacity at 45°C ambient | 1440 W (derated) |
| Operating ambient range | -10°C to +50°C |
| Power supply | 230V AC, 50/60Hz |
| Rated current | 5.4 A |
| Locked rotor current | 14.2 A |
| Refrigerant and charge | R134a, 620 g |
| Expansion device | Capillary tube with filter drier |
Mechanical and protection
| Enclosure rating | IP54 / NEMA 12 |
| Casing material | Galvanized steel, 100 µm powder coat |
| Fasteners | Stainless steel A2 |
| Sound pressure at 1 m | 50 dB(A) at 25°C |
| Dimensions (H×W×D) | 520 × 400 × 145 mm |
| Net weight | 26 kg |
| Protection functions | Over/under voltage, compressor overcurrent, high pressure |
| Communication | Modbus RTU (RS-485) standard |
Where This Configuration Is Specified
01
Aisle-restricted electrical rooms Rooms where cabinet doors and protruding equipment must maintain minimum egress clearance. The 145mm depth keeps the unit within the cabinet footprint envelope.
02
Cabinets with adjacent pipework or cable trays Side panels where conduit, piping, or tray runs leave limited clearance. Reduced depth avoids relocation of existing services during retrofit.
03
Prefabricated and skid-mounted enclosures Modular electrical houses and skids where overall transport dimensions are fixed. Slim casing keeps the assembly within shipping envelope limits.
04
Retrofit cooling for legacy cabinets Existing installations where internal component layout prevents installation of deeper units, but thermal load now requires active cooling.
Selection and Installation Notes
Sizing Calculate total internal heat dissipation and add solar gain for outdoor-facing panels. Apply a 20% margin. For cabinets above 2.0 m³ with concentrated drive loads, provide component list for thermal calculation.
Panel preparation Cutout dimensions 460 × 340 mm. Minimum panel thickness 1.5mm steel. Reinforce panels below 1.5mm. Sealing gasket maintains IP54 rating when compressed during mounting.
Clearance Maintain 150mm at the evaporator return and 280mm at the condenser discharge. Do not obstruct the front service access panel. Condenser air path must not recirculate into the evaporator intake.
Power and protection Dedicated 2-pole breaker, 10 A C-curve. Copper conductors 2.5 mm². Grounding resistance ≤ 4 Ω. External surge protection recommended for exposed installations.
Condensate Evaporated by condenser heat in standard configuration. Where continuous ambient humidity exceeds 85% RH, route the optional drain kit to a collection point.
Maintenance interval Filter inspection every 2 to 3 months depending on particulate load. Condenser coil cleaning quarterly. Annual verification of refrigerant charge, pressure switch operation, and electrical torque values.
Procurement FAQ
The 145mm dimension is the total depth from the cabinet panel surface to the outermost casing face, including the mounting frame and door profile. The recessed portion extends 105mm into the cabinet interior, leaving 40mm of external protrusion.
The standard configuration is rated IP54 for indoor and sheltered outdoor use. For direct outdoor exposure requiring IP55, specify the outdoor variant with additional sealing and corrosion coating. Consult the sales team for the model reference.
The unit is secured from inside the cabinet using M8 bolts through the mounting flange. A sealing gasket compresses against the panel surface. Eight mounting points are provided. The mounting template indicates bolt hole positions.
Dimensional drawing, wiring diagram, capacity table, refrigerant data sheet, Modbus register map, mounting template, and declaration of conformity are supplied. Test records for refrigerant charge and pressure verification are available on request for documented projects.
The slim casing platform is available with 400V three-phase input up to 2000W cooling capacity. The dimensional envelope remains identical. Contact the sales team for the three-phase model reference and lead time.
Standard warranty is 24 months from commissioning or 30 months from shipment. Compressor coverage extends to 60 months. Compressors, EC fans, controllers, and pressure switches are held as service parts for a minimum of 10 years from manufacture.
Product Categories
Complete Refrigeration Portfolio
Comprehensive range of industrial refrigeration equipment — standard & custom
Air Cooled Chiller
Efficient air-cooled systems for plastics, laser, food & diverse industries
energy savingWater Cooled Chiller
High-performance water-cooled industrial chillers with superior COP
high efficiencyAir Cooled Box Chiller
Compact, ready-to-use air cooled box chillers for small to medium loads
plug & playWater Cooled Box Chiller
Space-saving water cooled box type chillers with integrated pump & tank
integratedAir Cooled Screw Chiller
Heavy-duty screw compressor, air cooled — for large industrial applications
heavy dutyWater Cooled Screw Chiller
High-capacity water cooled screw chillers for continuous operation
reliableWater Cooled Screw Evaporative Cooling Chiller
Evaporative assisted cooling for maximum efficiency in hot climates
ecoProfessional Customization
Tailor-made solutions — from design to manufacturing, for your specific needs
CUSTOM ISO 9001 · CE Certified
Shanghai Soouney Refrigeration Equipment Co., Ltd.
A large-to-medium-sized high-tech enterprise integrating R&D, production and sales. Upholding "integrity, quality, service and innovation" — delivering reliable cooling solutions to the world.
11+
Export Countries
200+
Projects Delivered
19+
Years of Innovation
100%
Client Satisfaction
2007
Engineering Excellence in Refrigeration
Shanghai Soouney was founded with a vision to become a leading force in the refrigeration industry. We are China Slim Electrical Cabinet Air Conditioner Manufacturers and Custom Slim Electrical Cabinet Air Conditioner Suppliers. Today, we are a renowned brand in cabinet air conditioners and industrial chillers, recognised by professionals worldwide.
Rooted in the Chinese market, we provide reliable refrigeration solutions to clients across the globe — from standard products to professional customisation.
From standard products to professional customization — we deliver precision cooling.
R&D Driven
High starting points, stringent standards — continuous innovation
Integrity & Trust
Long-term partnerships built on transparency and after-sales support
Certified Quality
ISO 9001, CE, and industry-specific approvals across all lines
Global Mindset
Serving 40+ countries with tailored refrigeration solutions
"We don't just cool equipment — we build trust, one project at a time."
Why Soouney
Driven by Quality & Innovation
Committed to delivering excellence through continuous improvement and customer-centric solutions.
R&D Focus
High starting points, stringent standards — continuous product improvement
Integrity & Service
Long-term partnerships built on trust, transparency and after-sales support
Global Presence
Rooted in China, serving worldwide with reliable refrigeration solutions
Certified Quality
ISO 9001, CE, and industry-specific approvals for all product lines
