Stainless Steel Cabinet Air Conditioner

Select 316L where the site has sustained chloride exposure, such as coastal locations within roughly 5 km of the shoreline, or where cleaning chemicals contain chlorides. Select 304 for inland industrial environments without sustained chloride contact. Where the exposure category is between the two, 316L is the lower-risk choice and carries an 18% to 25% cost premium.

The coil fins are aluminium with an electro-deposition coating, not stainless. A full stainless coil would substantially increase cost and reduce thermal performance. The coated aluminium coil is the standard approach for coastal installations; for C5 and CX exposure, an upgraded coil coating is available as an option.

Yes. Mill certificates for the casing sheet grade are available with each order, supporting specifications that require material traceability. Certificate requests should be noted on the purchase order. Certificates are issued per production batch, not per unit.

The IP55 rating covers low-pressure water jets from any direction, which suits normal washdown procedures. High-pressure jets directed at gaskets or cable entries should be avoided. For installations using high-pressure cleaning, specify the NEMA 4X configuration and route the optional drain kit.

Dimensional drawing, wiring diagram, capacity table, refrigerant data sheet, Modbus register map, mounting template, declaration of conformity under LVD and EMC directives, and salt spray test report for the casing grade. Mill certificates available on request.

Standard warranty is 24 months from commissioning or 30 months from shipment. Compressor coverage extends to 60 months. Casing corrosion is covered where the specified grade matches the documented site exposure category. Service parts including compressors, EC fans, controllers, and gasket sets are held for a minimum of 10 years.